mill-max bottom-entry receptacles supplied on tape for surface mount applications features : ? uses mill-max #02 contact, designed to accept a pin or component lead .040-.050? diameter, .100-.175? long. ? supplied on 12mm wide carrier tape to feed industry standard pick and place machines, 1500 parts per 13? reel. ? mounts in a .090 .003? pth. ? designed for ?intrusive reflow? assembly and soldering: intrusive reflow (also called ?pin-in-paste?) is a technique of using conventional thru-hole components in a reflow soldering process. the receptacles are placed into plated-thru-holes in the circuit board (solder paste has previously been screen printed on pads adjacent to the holes) and the board is reflowed in the same pass as other smt components. solder will fill the holes and achieve solder joints as reliable as wave soldering without having to mask the receptacles. ?overprinting? paste on the solder mask can be used to adjust the volume of paste required to fill each hole. (6/01- 507) max imum solutions r maximum interconnect solutions mill-max mfg. corp. ? 190 pine hollow road, oyster bay, ny 11771-0300 516-922-6000 ? fax: 516-922-9253 e-mail: techserv@mill-max.com or sales@mill-max.com www.mill-max.com
bottom entry smt receptacles pr#507 1/19/00
|
